Aliquantum’s privacy & feature screens have been designed to appeal aesthetically as well as to perform in the harsh Australian climate. We combine the coolness of stainless steel with the warmth of quality hardwoods to create visual interest in your outdoor setting.

Ideal for balconies, decks, pergolas, or any area where privacy or attractive feature screening is required, these eye-catching screens are the solution. The slats are available in a range of thicknesses with the gap or the slat orientation being set at your specification.

Aliquantum Privacy and Feature Screens are available as single or twin panels with timber or stainless steel frames.

Timbers used include Jarrah, Merbau (kwila), Vitex or Cedar.

Please register your interest in this product here.

Aliquantum infill panels and fence topping screens are different to those generally available in Western Australia. While many installers of infill panels use a post and nail fixing system which results in a "good" side that faces outwards and a "bad" side that faces inwards, at Aliquantum, we use superior joinery techniques to create a panel that looks exactly the same from both sides. Apart from the visual benefits that this assembly method provides, our screens will outlast other infill installations using the post and nail method.

The slats are available in a range of thicknesses and sizes with the gap being set at your specification. Aliquantum infill panels are available as single or twin panels in a range of timbers including Jarrah, Kapur, Merbau, Vitex or Cedar.

Please register your interest in this product here

Add a touch of elegance to your poolside landscaping with an Aliquantum Shower or pool screen. The screens are fabricated from marine grade stainless steel (grade 316) and/or quality Australian & imported hardwoods. Aliquantum’s designs take into account the harshness of poolside conditions so we take care to ensure that these products are free draining to ensure a long and trouble free life cycle.

The pool filter screens provide an elegant solution where not only is your pool equipment protected from the damaging effects of the sun but the equipment is also isolated from the possibility of prying children’s fingers.

While the frames can be fabricated from a wide range of profiles, most typical frames are sized from 50x50mm and 38x 38mm Square tube or 50 x 25mm rectangular tube. As with all our screening products, the pool and shower screens are available in a range of timbers, slat sizes and configurations

Please register your interest in this product here

Aliquantum gates are available for both pedestrian and driveway access. Our gates are fabricated in a range of sizes and configurations that may incorporate laser cut motifs as well as a range of infill alternatives including solid panels, tongue & grooved sections or a range of slat sizes and configurations.

The frames are fabricated primarily from stainless steel (polished or brushed finishes) but we also supply powder coat frames when requested. Section profiles include 50 x 50mm, 38 x 38mm and 50 x 25mm.
Aliquantum gates care can be fabricated to accommodate many landscaping challenges such as sloping ground or retaining walls. They incorporate quality hardware that complies with Western Australia’s swimming pool regulations.

Please register your interest in this product here

All Aliquantum balustrade installations are custom designed. Whether your requirement is for indoor or outdoor balustrades, we provide a design, fabrication & installation service where your balustrade requirement can be transformed to meet the customer’s needs.

Although we fabricate fully stainless steel balustrades, our specialty is in the combining of Australian and imported hardwood timbers with stainless steel sections. The coolness of stainless steel when combined with the warmth and durability of jarrah (for example) provides a wonderful tactile contrast. This is a feeling we like our customers to enjoy.
Railing sections can be supplied in timber, stainless steel wire or polished stainless steel tubing/rod.

Please register your interest in this product here

Aliquantum’s simple but stylish awning range will compliment most architectural styles. In addition to their obvious cooling attributes, they are particularly good at providing year round weather protection for all types of doors (French, Bi-folds and sliders) and windows.
Designed to appeal on a minimalist level, an Aliquantum awning is robust and can take the worst of Australia’s weather.
The range includes:

• The Café Style (tubular support arms)
• The Slimline Shade Panel (wire supports) and
• Nautica Shade Panel (tubular frame and supports).

The frames for all awnings in the range are fabricated using polished grade 316 stainless steel while the canopies are fabricated from top of the range fabric - Ferrari Soltis. All other fittings are marine grade stainless steel.

The standard residential design features 750mm, 1000mm and 1200mm projections which may be used to cover up to 6m of wall.

Please register your interest in this product here

FULL DATA SHEETS ARE AVAILABLE ON REQUEST